Combine Harvester Maintenance Tips
Combine harvester has become a familiar name for all producers and operators in the farm field. They come in different types and sizes for special purposes and crop requirements. No matter what type of combine harvester you are using all of them complete the same mission, serving agricultural automation, and conserving labour and time for producers. With so many benefits of using the machine the development, the combine machines design has been continuously upgraded and shifted more advanced. With so many advancements the price also becomes higher so better take the care needed.
In this article, we are going to cover the methods of increasing the life of combine harvester. So here are some points that help you increase the life of the combine machine.
Starting the Harvester
Before you continue with harvesting the machine should be ignited and the speed should be locked so that the blade of the harvester machine does not get caught with the straw.
Choosing the Time
Time plays an important factor in harvesting. It is decent to harvest the crops after 9.00 am. The purpose for this is that there is less dew and the products are dry to be collected. It is also not acknowledged to harvest during or after a rain as this may start to blocking the harvester and strengthening the crop loss.
Adjustment of Header
The header of the combine harvester should be properly set. If the heat is large then it is seen that collecting the small straws are hard and it may also affect the next sowing. It is recommended that in such a situation the header should be reduced but not more than 6 cm unless the soil will be cut and split the knife.
Proper Handling of the Machine
It should be assured that the combine machine is moving in a straight style while harvesting. Otherwise, it may lead to not collecting all the crops and dropping them in the field. Another thing to be heeded while running a harvester is that when it had to turn the harvesting should be closed otherwise the grains may fall off from the truck.
Throttle Valve
The throttle valve should be kept at average or in an open space while you are harvesting. If this is done while the combine harvester is leaving the harvesting field it will ensure that the crops are all out.
Cleaning of Combine Harvester
The combine harvesters should be correctly cleaned of soil or any weeds that are left back after harvesting. If this is not done well then it may lead to blocking of the harvester during the next harvest.
Hope these points will help you complete your harvesting work on time. If you are planning to buy a combine harvester and also wants to know the combine harvester price then you should visit the Fieldking website.
